J&J Pumps Inc. can design a turbine pump for most applications. Featured below are a few of the submersible and non submersible turbine pumps we carry. We can size a system for your application and ship you the parts you need, ranging from just a rebuild kit for an existing pump to an entire turbine pump system including pump, motor, panel/drive, pipe, wire, check valves/valves, well heads, etc. If you don't see the product you need listed below please contact us because chances are we have it, or we can get it for you.

Vertical Lineshaft and Submersible Turbines with bowl diameters from 4" through 30" with capacities to 20,000 gpm. Pumps can be designed for deep well or short set applications in various materials of construction.

Turbine Pumps
J&J Pumps Inc. does not claim rights to nor ownership of the following companies and or logos. J&J Pumps.com owned by J&J Pumps Inc. is an authorized dealer for the products sold by the following companies. The following logos are representing completely different companies and are not necessarily affiliated with one another.

Line Shaft and Submersible, and Stainless Steel Submersible Turbine Pumps

Short Set Lineshaft Turbine Pumps:

Various material of construction. Threaded or flanged column. Above or below ground discharge. Flow up to 20,000 GPM and 500 TDH. Alloy construction are available.

Features and Benefits:

Cast-iron bronze fitted or alloy construction bowl assembly 5" to 30" sizes, Open lineshaft with threaded or flanged column pipe,Enclosed or open impellers,Packed stuffing boa or mechanical seal,Above or below ground discharge with VHS or HSS motor.

Submersible Turbine Pumps

Cast-iron bronze fitted bowl assembly with submersible motor. Flow up to 8000 GPM and 1000 ft TDH. Alloy construction are available.

5" and Larger CentriPro Submersible Motors

The 6 inch canned design motor features a replaceable plug-in motor lead, moisture resistant insulation and a specially formulated patented resin that protects the motor against thermal fluctuation and internal stress.

The 8 to 10 inch rewindable water-tight motor has a coil conductor insulation material that is specially developed denatured polypropylene, which offers excellent leak-resistant characteristics. Three barriers are applied to the copper conductors to provide complete insulation against the motor's cooling fluid. This design is the result of extensive research and is of superior quality. It insures that CentriPro motors will have an extremely long service life.

SPECIAL ITEM:

Turbi-Float system Floating Pump system

Aggregates | Construction/Industrial | Agriculture | Municipalities

TURBI-FLOAT CONTINUED

Aggregates and Mining:
Pit and quarry dewatering is made easier with Turbi-Float®. With flows through 3500 gallons per minute and heads to 300 feet, Turbi-Float® can handle many projects with a single pump, and where required multiple pumps can be connected in parallel for higher capacities.

The Turbi-Float System better provides washing and processing water. No more priming of suction lift centrifugals, and draining in freezing weather. Standard air-cooled motor drivers offer increased durability and efficiency at a lower cost than submersible motor pumping equipment.

Agriculture:
Flood irrigation of cropland with Turbi-Float® is efficiently accomplished with the high volume, low head models.

Center pivot, side roll, and other overhead application methods are easily handled by the high performance Turbi-Float System®.

Confined Animal Feeding Operations (CAFO) which dispose of effluentwastewater benefit from the durability and ease of operation of the Turbi-Float System®. "Yellow water" disposal is efficiently pumped by Turbi-Float®. (Not intended for solids handling applications)

CAFO freshwater supplies from surface water resources, such as canal transport systems to your facility.

Construction / Industrial:
Supply of surface water for dust control, washing, processing, and other uses.

Municipalities, etc:
Non-potable irrigation water for parks and recreation. Golf course irrigation from ponds and lakes. Significant cost savings over hard-set equipment in expensive pumping stations.